Карбида Вольфрама Волочения Проволоки Умирает Крупка Гранула

Модель нет.: все размеры Размер: различные размеры Тип: машина чертежа провода аттестация: ISO 9001:2008 типа: в s11, s13, на, р, W104, W105, 6х4, 9Х6, 16X13 и т. д. торговая марка: ГВ Спецификация: 33x23x19cm код HS: 8207209000 печатание Логоса: ГВт или Подгонянный OEM: Стандартный или Подгонянный Материал: твердый сплав: Yg3, Yg3X, Yg6, Yg6X, yg8 карбида, Yg11, Yg15 допуск: заготовки, обработайте, обработайте с стальным случаем транспортной упаковки: Стандартная Коробка происхождения: Хунань чжучжоу карбида вольфрама волочения проволоки умирает\н\Н1. Наше преимущество\Н1 сырье 100%\Н2 хип печи Спеченные \Н3 высокой точности меля\Н4 отверстия размером до 0,1 мм\н5 производить готовые штампы со стальной корпус\н6-быстрая доставка\Н7 Профессиональное изготовление продуктов карбида вольфрама с 20 летами опыта.\н8 полная система контроля качества и строгий контроль.\н\Н2. Наши прессформы Размер
Type ж
Type С11
Type С12
Type 13й
Type 22
Type 23
Type С30
Type на S40
Type станка s41
Type S42
Type на S60
Type р\н\Н3. Рекомендации класс

Properties of grade
Grade	Density	Hardness (HRA)	TRS	Grain size
	(g/cm3)		(MPa)	(um)
YL01	15.25	93.5	3300	0.8
YL10.2	14.5	92	4000	0.8
YG6	14.95	90	2400	1.6
YG6X	14.95	91.5	1900	1
YG8	14.75	89.5	2800	1.6
YG11	14.4	87.5	3100	1.6
YG15	14.05	87	3000	1.6
Application recommended
Grade	Applications recommended
YL01	Used for drawing diameter less than 1.5 mm of steel, tungsten and molybdenum wire under high speed drawing as well as nonferrous metals with high requirement on surface finish.
YL10.2	Used for drawing diameter between 1.5 mm to 10mm of steel, tungsten and molybdenum wire under high speed drawing as well as nonferrous tubes with high requirement on surface finish.
YG6	Used for drawing the diameter less than 20mm of steel, nonferrous metals and its alloy wire or bar under a moderate stress. It also used for tubes less than diameter of 10mm.
YG6X	Used for drawing the steel wire, nonferrous metals and its alloy wire or bar under the requirement of good wear resistant.
YG8	Used for drawing diameter less than 50 mm of steel, nonferrous and its alloy wire or bar under a moderate stress. It also used for tubes under 35mm.
YG11	Used for drawing diameter less than 60 mm of steel, nonferrous and its alloy wire or bar under a moderate stress. It also used for tubes under 35mm.
YG15	Used for steel pipe and steel bar as well as alloy steel bolt and head forging of rivet under a certain big stress

Grade	Density(g/cm3)	Hardness(HRA)	TRS(MPa)	Applications recommended
YG6X	14.95	91.5	1800	For drawing steel and nonferrous wires or bars of less than diameter 6.00mm under not so much stress.
YG6	14.95	90.5	1900	For drawing steel, nonferrous alloy bars of less than diameter 20.00mm under more stress and also for drawing tubes of less than diameter 10.00mm.
YG8	14.8	89.5	2200	For drawing steel and nonferrous bars and tubes, also for manufacturing mechanical parts, tools and wear parts.
YG10	14.5	88.5	2400
YG15	14.0	87.0	2800	For drawing steel bars and tubes with a high reduction rate and for manufacturing anvils, drilling and punching and impacting.

Группа Продуктов : Карбида Вольфрама Рисунок